I mounted the shift lights on an aluminum bracket I made and riveted it to the bottom of the fairing stay. The lights are nice and high and ...

While I'm on the subject of wiring.....this is the tape that I used to wrap all the wiring work I've done on the R over the lst few...

Along with the super-light Shorai battery, I made some heavier gauge cables. The standard cables were about 6.5mm in diameter, whereas t...

Hey what's a slipper clutch and how does it work? A question I asked myself may times as I read about track day riders extolling the jo...

Above and below is a closeup shot of a ball bearing sitting in grease on the "ramp" of the clutch hub. The ramps in this partic...

This inner part of the clutch hub on the left with the ramps and balls. The part on the right (also with ramps) is shown upside down and fit...

Brake rotor 2003 999R on left. Right-rotor 999S. Note the relieved edge on the R rotor. I have no idea why it's there. They weight the s...