and sick of trying to get the pointer of the dial indicator to sit nicely on the top of the closing shim....so, I made this thing. Hope it works...won't know until tomorrow!!!
WOOD-N-STEEL
8 years ago
Subscribe to:
Post Comments (Atom)
skip to main |
skip to sidebar
http://www.facebook.com/profile.php?id=1738290019
My Facebook profile
WELCOME TO MY BLOG
Here you'll find some info on Ducati repair and modifications along with photos. I've got stuff for sale too, so check out the older posts. Please leave comments about anything you see, good or bad. Thanks for looking, Steve
Search This Blog
BLOG LIST
-
-
THE BIKE IS SOLD!!!!9 years ago
My Blog List
Blog Archive
-
▼
2010
(50)
-
▼
January
(19)
- The laser worked well on the rear...
- A little experiment......
- While I had the front end apart I made some adjust...
- GETTING IT BACK TOGETHER......
- GEOMETRY.....
- One more thing on belt tension.....
- Cam Timing cont.
- Cam Timing DONE!
- VERTICAL CYLINDER
- Well, it worked fine once I made some modification...
- I'm CRAZY.........
- VERTICAL CYLINDER CAM TIMING
- Horizontal Cylinder cam timing check.
- Here's the cheap cam wheel holding tool I got from...
- Had to run out the other night to find a 26mm offs...
- I had to fab a custom bent rod for the dial indica...
- Inspection time for the "R"
- I marked the cam wheels and belts to indicate the...
- The cams are out and I get a good look at all the ...
-
▼
January
(19)
No comments:
Post a Comment